Customer Story - Real-time Data Collection with the Trimble R1 and Collector for ArcGIS Here is a Trimble/Esri customer story right in Seiler Instruments backyard - St Louis, MO. Bethany Marshall, a graduate student in MS in GIScience program of Center for Sustainability at Saint Louis University presented her summer project at a recent ASPRS [...]
Data Collection with TerraFlex - Overview of software and Point Feature collection This video will cover the basics of using the Trimble TerraFlex software with the Yuma 2 and R1 GNSS Receiver Point features and photos were collected using a Real-time correction from the FAA - SBAS/WAAS. TerraFlex Point Feature Data Collection with a [...]
VRS Real-Time PDOP Settings in TerraSync When using TerraSync in a VRS (Virtual Reference System) Real-time Correction Network here are the PDOP settings that should be used. Uncheck Smart Settings and set the following PDOP values to: Max PDOP: 6.0 Min SNR: 39.0 Min Elevation: 10 degrees *You will also want to set these [...]
Windows 10 is not currently compatible with Trimble mapping hardware and software At this time Windows 10 Operating System is not currently supported by Trimble, they are currently testing compatibility with Windows 10. Please stay tuned for further details once Windows 10 is compatible with Trimble hardware and software. If you have any questions please [...]
Overview of Trimble GNSS Status App on an Android device - Connected to a Trimble R1 GNSS Receiver See our Seiler Solutions YouTube website to watch a video on how to use an "Android device, Trimble GNSS Status App with the Trimble R1 Receiver" https://www.youtube.com/watch?v=bqM7Y0CBAos **The Trimble R1 is a Sub-meter device. In this video the [...]
Bluetooth pairing an Android device to a Trimble R1 GNSS Receiver In this video you can follow along and learn how to Bluetooth Pair an Android device to the Trimble R1 GNSS Receiver. See the Trimble R1 GNSS Receiver Quick Start Guide for details about "Bluetooth Pairing Mode" and Power On/Off and Lights. The Getting [...]
Unlocking Developer Options and Allowing Mock Locations on an Android device See our video on "Seiler Solutions You Tube" for Allowing Mock Locations on an Android device The purpose for Unlocking Developer Options and turning on "Allowing Mock Locations" on an Android device is so that we can use the GNSS Location from an external GNSS [...]
Trimble External Antennas for Geo Explorers There are several external antennas that can be used with the different Geo Explorers models and versions (XT vs. XH). Tempest antenna (this replaced the older Hurricane model) compatible with the Sub Meter Geo XT's. There were 2 versions of the Tempest: The original Tempest antenna for L1 GPS only [...]
Where to download the Trimble GPS Pathfinder Office and Trimble TerraSync? Both the Trimble GPS Pathfinder Office and Trimble TerraSync software's were "Retired" from production and resale effective September 2022. You can still download and use them if you have a valid installation code from this website: Trimble Discontinued Products and Support Documents We [...]
How to create a System report on your Trimble GPS device If you are trying to trouble shoot your GPS unit and need to email a "System Report" to your Trimble Dealer below describes the creation process of the "System Report" for most of the Trimble MGIS hardware. The "System Report" can help you and [...]